Access the full text.
Sign up today, get DeepDyve free for 14 days.
Nahida Nisar, J. Bhat (2021)
Effect of Coupled Deterioration Mechanisms on Corrosion of Steel Reinforcement: The Role of Chloride Ion Ingress, Freeze–Thaw Cycles and Green Corrosion InhibitorJournal of Bio- and Tribo-Corrosion, 7
Tao Chen, Wenpeng Li, Defu Liu, Yi-qiu Xiong, Xiangcheng Zhu (2021)
Effects of heat treatment on microstructure and mechanical properties of TiC/TiB composite bioinert ceramic coatings in-situ synthesized by laser cladding on Ti6Al4VCeramics International, 47
B. Bhushan, B. Gupta (1991)
Handbook of Tribology: Materials, Coatings, and Surface Treatments
Microscopic and electrochemical characterization of alumina ceramic films developed onto 316l stainless steel by microarc oxidation in plasma electrolysis | Request PDF
L. Lyu, Jian Yang, Mingyang Zhou, M. Yan, Jijun Yang (2023)
Microstructure, mechanical properties and lead-bismuth eutectic corrosion behavior of (AlCrFeTiMo)NO and (AlCrFeTiNb)NO high entropy metal sublattice ceramic coatingsVacuum
Hao Chen, Yuanyuan Lu, Yunsen Sun, Yafeng Wei, Xinyun Wang, Dejian Liu (2020)
Coarse TiC particles reinforced H13 steel matrix composites produced by laser claddingSurface & Coatings Technology, 395
Radhika Nachimuthu, M. Sam, Arumuga Thangamayandi, Yashwanth Gayathri, L. Ranganathan (2022)
Tribological and mechanical characterization of as-cast and thermal treated Al-9Si/SiC graded compositeProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236
R. Jojith, N. Radhika, R. Raj (2020)
Characterization and Wear Behaviour of WC-Co Coated Copper under Dry Sliding Conditions at Varying Hardness, 42
Ya-guang Han, Yong Yang, Lei Wang, X. Chen, Z. Chu, Xu-ning Zhang, Yan-chun Dong, Zhe Liu, Dian-ran Yan, Jianxin Zhang, Chonggui Li (2018)
Microstructure and properties of in-situ TiB 2 matrix composite coatings prepared by plasma sprayingApplied Surface Science, 431
L. Pezzato, A. Settimi, Daniel Fanchin, E. Moschin, I. Moro, M. Dabalà (2022)
Effect of Cu Addition on the Corrosion and Antifouling Properties of PEO Coated Zinc-Aluminized SteelMaterials, 15
R Nachimuthu (2022)
10.1177/09544062221084189/ASSET/IMAGES/LARGE/10.1177_09544062221084189-FIG2.JPEGProc Inst Mech Eng C J Mech Eng Sci, 236
T. Ma, Zhong Zhao, Longyu Zhang, X. Huang, L. Liu (2011)
High-Hardness Solidified TiB2-TiC Composites Prepared by Combustion Synthesis under High GravityAdvanced Materials Research, 233-235
A Fattah-alhosseini (2018)
10.1007/S11665-018-3124-1/FIGURES/13J Mater Eng Perform, 27
Yankun Li, Minfang Chen, Wei Li, Qi Wang, Yansong Wang, C. You (2019)
Preparation, characteristics and corrosion properties of α-Al2O3 coatings on 10B21 carbon steel by micro-arc oxidationSurface and Coatings Technology
Jin Liu, Yang Li, N. Tan, Zeyu Hu, Yujie Zhou, Qiyao Deng, Guoliang Zhang, Zichuan Lu (2023)
Microstructure and properties of the solid solution ceramic coating by high speed laser claddingOptics & Laser Technology
Peng-xiang Zhang, Hong Yan, Yongan Sun (2021)
Microstructure, microhardness and corrosion resistance of laser cladding Al2O3@Ni composite coating on 304 stainless steelJournal of Materials Science, 56
Z. Zhang, T. Yu, R. Kovacevic (2017)
Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VCApplied Surface Science, 410
K. Lim, Young Kim, S. Hong, G. Song, K. Kim (2020)
Influence of N2 Gas Flow Ratio and Working Pressure on Amorphous Mo–Si–N Coating during Magnetron SputteringTHE Coatings, 10
(2022) Carbide-based thermal spray coatings: a review on performance characteristics and post-treatment
V. Malinovschi, A. Marin, M. Mihalache, I. Iosub (2016)
Preparation and characterization of coatings on carbon steel obtained by PEO in silicate/carbonate electrolyteSurface & Coatings Technology, 296
S Tailor (2014)
10.1007/S11666-014-0065-6/FIGURES/9J Therm Spray Technol, 23
OP Modi (2000)
10.1361/105994900770345647/METRICSJ Mater Eng Perform, 9
M. Molaei, K. Babaei, A. Fattah‐alhosseini (2020)
Improving the wear resistance of plasma electrolytic oxidation (PEO) coatings applied on Mg and its alloys under the addition of nano- and micro-sized additives into the electrolytes: A reviewJournal of Magnesium and Alloys
T. Ghara, P. Bandyopadhyay (2022)
Mechanical Properties and Residual Stress Depth Profiles of Plasma Sprayed Ceramic Coatings Deposited Under Comparable Particle Temperature and VelocityJournal of Thermal Spray Technology, 31
M. Sam, N. Radhika (2021)
Influence of carbide ceramic reinforcements in improving tribological properties of A333 graded hybrid compositesDefence Technology
T. Olugbade, T. Abioye, P. Farayibi, N. Olaiya, B. Omiyale, T. Ogedengbe (2020)
Electrochemical Properties of MgZnCa-Based Thin Film Metallic Glasses Fabricated by Magnetron Sputtering Deposition Coated on a Stainless Steel SubstrateAnalytical Letters, 54
A. Pathak, G. Sivakumar, D. Prusty, J. Shalini, M. Dutta, S. Joshi (2015)
Thermal Spray Coatings for Blast Furnace Tuyere ApplicationJournal of Thermal Spray Technology, 24
F. Mubarok, S. Armada, I. Fagoaga, N. Espallargas (2013)
Thermally Sprayed SiC Coatings for Offshore Wind Turbine Bearing ApplicationsJournal of Thermal Spray Technology, 22
JOJ Material Sci Abrasive Machining Techniques for Biomedical Device Applications
C. Li, Xiao-Tao Luo, S. Yao, Guang-Rong Li, Cheng-Xin Li, Guanjun Yang (2022)
The Bonding Formation during Thermal Spraying of Ceramic Coatings: A ReviewJournal of Thermal Spray Technology, 31
Yu-Fei Wang, Zhengbao Yang (2007)
Finite element analysis of residual thermal stress in ceramic-lined composite pipe prepared by centrifugal-SHSMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 460
S. Hashemi, N. Parvin, Z. Valefi, M. Alishahi (2019)
Comparative study on tribological and corrosion protection properties of plasma sprayed Cr2O3-YSZ-SiC ceramic coatingsCeramics International, 45
M. Zavareh, Ahmed Sarhan, Parisa Zavareh, B. Razak, W. Basirun, M. Ismail (2016)
Development and protection evaluation of two new, advanced ceramic composite thermal spray coatings, Al2O3–40TiO2 and Cr3C2–20NiCr on carbon steel petroleum oil pipingCeramics International, 42
KM Ibrahim (2022)
10.1007/S40735-022-00706-9/METRICSJ Bio Tribocorros, 8
R. Mahmoodian, R. Rahbari, M. Hamdi (2011)
Safety Issues Improvement in Ceramic Lined Composite Pipe Produced Using SHS Method
B. Swain, Swadhin Patel, P. Mallick, S. Mohapatra, A. Behera (2019)
Solid Particle Erosion Wear of Plasma Sprayed NiTi Alloy Used for Aerospace ApplicationsInternational Thermal Spray Conference
M. Lungu, D. Cristea, F. Baiasu, C. Staicu, A. Marin, O. Pompilian, B. Butoi, C. Locovei, C. Porosnicu (2022)
Surface, Structural, and Mechanical Properties Enhancement of Cr2O3 and SiO2 Co-Deposited Coatings with W or BeNanomaterials, 12
X. Xue, Zehua Wang, Zehua Zhou, Shao-qun Jiang, Jiangbo Cheng, Changzhong Wang, J. Shao (2014)
Bonding characteristics of the Al2O3-metal composite coating fabricated onto carbon steel by combustion synthesisInternational Journal of Minerals, Metallurgy, and Materials, 21
S Kumar (2022)
10.3390/MA15249002/S1Materials, 15
V. Andrei, E. Coaca, I. Ioniţă, G. Torok, O. Rusu, A. Marin, M. Mihalache, L. Velciu, V. Malinovschi, T. Vişan (2017)
Microstructures and micro composition developed by Plasma Electrolysis Processing of 316L austenitic steels to obtain Al-containing surface layerMaterials Today: Proceedings, 4
Guibo Yu, Feng Tao, Shu Wang, Lijun Cao, Qiaozhi Ma (2014)
Solidification Behavior of Lined Al2O3-ZrO2 Multiphase Ceramics in SHS Composite PipesAdvanced Materials Research, 905
DC Hu (2023)
10.1007/S41779-022-00816-0/METRICSJ Aust Ceram Soc, 59
V. Sreenivasulu, P. Subramani, V. Jayakumar, K. Mageshkumar, N. Arivazhagan, M. Manikandan, S. Tofil, M. Sathishkumar (2022)
Development of protective coating for X8CrNiMoVNb16-13 alloy in high-temperature molten salt environment through high-velocity oxy-fuel sprayed NiCrMoNb and Cr3C2-25NiCr powder coatingProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237
D. Kennedy, Yueqiang Xue, E. Mihaylova (2005)
Current and Future Applications of Surface Engineering
Sunil Kumar, S. Bhaumik, Lokeswar Patnaik, S. Maity, V. Paleu (2021)
Application of Integrated BWM Fuzzy-MARCOS Approach for Coating Material Selection in Tooling IndustriesMaterials, 15
I. Taji, Mehrdad Hoseinpoor, M. Moayed, Sohrab Pahlavan (2020)
Pitting Corrosion of 17-4PH Stainless Steel: Impingement of a Fluid Jet vs. Erosion–Corrosion in the Presence of the Solid ParticlesJournal of Bio- and Tribo-Corrosion, 6
T. Olugbade, Chang Liu, Jian Lu (2019)
Enhanced Passivation Layer by Cr Diffusion of 301 Stainless Steel Facilitated by SMATAdvanced Engineering Materials, 21
Lu Cui, W. Kang, Hongjuan You, Jiarui Cheng, Zhen Li (2020)
Experimental Study on Corrosion of J55 Casing Steel and N80 Tubing Steel in High Pressure and High Temperature Solution Containing CO2 and NaClJournal of Bio- and Tribo-Corrosion, 7
Q. Li, Jianliang Xie, Jin Hu, Xin Wang, Chengyong Yu, Shaoliang Jiang, P. Liu, Chen Sun, En-dong Li, Longjiang Deng (2021)
Influence of Ca/Al ratio on physical and dielectric properties of Al2O3/CaO-B2O3-SiO2 glass-ceramics composite coatings prepared by high enthalpy atmospheric plasma sprayingJournal of the European Ceramic Society
B Xu (2010)
10.4028/WWW.SCIENTIFIC.NET/AMR.105-106.12Adv Mat Res, 105–106
T. Văn, T. Nguyen, Q. Thu, Ha Thi (2019)
Influence of plasma spraying parameters on microstructure and corrosion resistance of Cr3C2-25NiCr cermet carbide coatingAnti-Corrosion Methods and Materials
A Hospach (2012)
10.1007/S11666-012-9748-Z/FIGURES/7J Therm Spray Technol, 21
M. Sam, R. N, B. Saleh (2022)
Influence of boride, oxide, and carbide ceramics as secondary reinforcement in T6-A333 functionally graded hybrid compositesCeramics International
R. Mahmoodian, M. Hassan, R. Rahbari, R. Yahya, M. Hamdi (2013)
A novel fabrication method for TiC–Al2O3–Fe functional material under centrifugal accelerationComposites Part B-engineering, 50
D. Kumar, Q. Murtaza, R. Walia, Pushpendra Singh (2021)
Comparative investigation on thermally sprayed Al2O3, Al2O3–13%(TiO2) and Al2O3–40%(TiO2) composite coatings from room to 400 °C temperatureSurface Topography: Metrology and Properties, 10
Meiyan Li, B. Han, Yong Wang, Lixin Song, Guo Lanyang (2016)
Investigation on laser cladding high-hardness nano-ceramic coating assisted by ultrasonic vibration processingOptik, 127
E. Miyazaki, O. Odawara (2003)
Centrifugal effects on combustion synthesis of (Ti–B–C) compound systemMaterials Research Bulletin, 38
Zhou Jingzhong, Sun Kuoteng, Huang Songqiang, Cai Weichen, Wei Yangzhi, L. Meng, Zhaowei Hu, Wenge Li (2020)
Fabrication and Property Evaluation of the Al2O3-TiO2 Composite Coatings Prepared by Plasma SprayCoatings
X. Huang, Longyu Zhang, Zhong Zhao, C. Pan, G. Su (2010)
TiB2-(Ti,W)C Eutectic Composite Ceramics Prepared by Combustion Synthesis under High GravityAdvanced Materials Research, 177
T Ghara (2022)
10.1007/S11666-022-01412-1/FIGURES/9J Therm Spray Technol, 31
AR Govande (2022)
10.1016/J.IJRMHM.2021.105772Int J Refract Metals Hard Mater, 103
T Olugbade (2019)
10.1007/S40735-019-0235-7/METRICSJ Bio Tribocorros, 5
E. Yakovlev, A. Markov, P. Butaygin, S. Arbuzova, V. Petrov, D. Shepel' (2018)
Electron beam surface alloying of carbon steel by aluminium followed by micro-arc oxidationJournal of Physics: Conference Series, 1115
DE Andreev (2011)
10.3103/S106138621101002X/METRICSInt J Self Propag High Temp Synth, 20
Qianlin Wu, Wenge Li, N. Zhong, Wu Gang, Wang Haishan (2013)
Microstructure and wear behavior of laser cladding VC–Cr7C3 ceramic coating on steel substrateMaterials & Design, 49
A. Fattah‐alhosseini, S. Gashti, M. Molaie (2018)
Effects of Disodium Phosphate Concentration (Na2HPO4·2H2O) on Microstructure and Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Coatings on 2024 Al AlloyJournal of Materials Engineering and Performance, 27
A Farjami (2020)
10.1007/S40735-020-00397-0/METRICSJ Bio Tribocorros, 6
R. Licheri, R. Orrú, G. Cao, A. Crippa, R. Scholz (2003)
Self-propagating combustion synthesis and plasma spraying deposition of TiC–Fe powdersCeramics International, 29
Dinesh Devarajan, Baskaran Rangasamy, Kamalan Mosas (2023)
State-of-the-Art Developments in Advanced Hard Ceramic Coatings Using PVD Techniques for High-Temperature Tribological ApplicationsCeramics
M. Abedi, A. Abdollah-zadeh, A. Vicenzo, M. Bestetti, Farid Movassagh-Alanagh, Elyad Damerchi (2019)
A comparative study of the mechanical and tribological properties of PECVD single layer and compositionally graded TiSiCN coatingsCeramics International, 45
Y. Kawahara (2016)
An Overview on Corrosion-Resistant Coating Technologies in Biomass/Waste-to-Energy Plants in Recent DecadesTHE Coatings, 6
M. Zavareh, Ahmed Sarhan, B. Razak, W. Basirun (2014)
Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applicationsCeramics International, 40
D. Andreev, V. Sanin, N. Sachkova, V. Yukhvid (2011)
Cermet-lined tubes from industrial wastes by centrifugal SHSInternational Journal of Self-Propagating High-Temperature Synthesis, 20
Q. Meng, Shaoping Chen, J. Zhao, Hua Zhang, Hongxia Zhang, Z. Munir (2007)
Microstructure and mechanical properties of multilayer-lined composite pipes prepared by SHS centrifugal-thermite processMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 456
B. Marple, J. Voyer, M. Thibodeau, D. Nagy, R. Vaßen (2006)
Hot Corrosion of Lanthanum Zirconate and Partially Stabilized Zirconia Thermal Barrier CoatingsJournal of Engineering for Gas Turbines and Power-transactions of The Asme, 128
Fatemeh Jasempoor, H. Elmkhah, O. Imantalab, A. Fattah‐alhosseini (2022)
Improving the mechanical, tribological, and electrochemical behavior of AISI 304 stainless steel by applying CrN single layer and Cr/CrN multilayer coatingsWear
S. Gowtham, T Arunnellaiappan, N. Rameshbabu (2016)
An investigation on pulsed DC plasma electrolytic oxidation of cp-Ti and its corrosion behaviour in simulated body fluidSurface & Coatings Technology, 301
M. Le, Dojin Kim, Jaeryeong Lee, Cheolgi Kim, H. Chung (2008)
Properties of Ceramic Layer Formed by Centrifugal Thermit Reaction with Silicon Sludge ReplacementMaterials Transactions, 49
T. Olugbade, Jian Lu (2019)
Enhanced Corrosion Properties of Nanostructured 316 Stainless Steel in 0.6 M NaCl SolutionJournal of Bio- and Tribo-Corrosion, 5
S. Shinde, S. Sampath (2021)
Factors Governing Segmentation Crack Characteristics in Air Plasma Sprayed CeramicsJournal of the European Ceramic Society
Yu Zhao, Tianbiao Yu, C. Guan, Jiayu Sun, X. Tan (2019)
Microstructure and friction coefficient of ceramic (TiC, TiN and B4C) reinforced Ni-based coating by laser claddingCeramics International
X Wenjun (2000)
10.1023/A:1004776112579/METRICSJ Mater Sci, 35
J. An, X. Yan, X. Lv, Z. Wen (2017)
Microstructure, Mechanical Properties and Corrosion of Ceramic-lined Composite Steel Pipe Prepared by Centrifugal-SHS ProcessScience of Sintering, 49
loana Csáki, C. Manea, R. Trusca, S. Karlsdóttir, R. Ștefănoiu, V. Geantǎ (2017)
Microstructural Study of the Corrosion Effect on AlCrFeNiMn Multicomponent Alloy Tested in Geothermal EnvironmentCorrosion
M. Qunshuang, L. Yajiang, W. Juan, Liu Kun (2016)
Microstructure evolution and growth control of ceramic particles in wide-band laser clad Ni60/WC composite coatingsMaterials & Design, 92
W. Xi, S. Yin, Shi-ju Guo, H. Lai (2000)
Stainless steel lined composite steel pipe prepared by centrifugal-SHS processJournal of Materials Science, 35
A. Praveen, J. Sarangan, S. Suresh, J. Subramanian (2015)
Erosion wear behaviour of plasma sprayed NiCrSiB/Al2O3 composite coatingInternational Journal of Refractory Metals & Hard Materials, 52
N. Manninen, S. Calderon, C. Alves, S. Carvalho, A. Cavaleiro (2015)
Influence of hydrogen incorporation and coating thickness on the corrosion resistance of carbon based coatings deposited by magnetron sputteringSurface & Coatings Technology, 275
Weizhan Wang, S. Feng, Zhongming Li, Zhigang Chen, Zhao Taiyong (2020)
Microstructure and properties of micro-arc oxidation ceramic films on AerMet100 steelJournal of materials research and technology, 9
Jashanpreet Singh, Satish Kumar, S. Mohapatra (2019)
Tribological performance of Yttrium (III) and Zirconium (IV) ceramics reinforced WC–10Co4Cr cermet powder HVOF thermally sprayed on X2CrNiMo-17-12-2 steelCeramics International, 45
J. Demasi-marcin, D. Gupta (1994)
Protective coatings in the gas turbine engineSurface & Coatings Technology
M. Zavareh, Ahmed Sarhan, R. Karimzadeh, A. Singh, Lakhbir Singh (2017)
Analysis of Corrosion Protection Behavior of Al 2 O 3 -TiO 2 Oxide Ceramic Coating on Carbon Steel Pipes for Petroleum IndustryCeramics International, 44
S Singsarothai (2016)
10.3103/S1061386216030110/METRICSInt J Self Propag High Temp Synth, 25
E. Miyazaki, O. Odawara (2001)
Centrifugal-Thermit Process for Production of Composite Pipes of Various Sizes
(2022)
) Comparative investigation on thermally sprayed Al 2 O 3 , Al 2 O 3 –13%(TiO2)
DM Ikornikov (2011)
10.3103/S1061386211010079/METRICSInt J Self Propag High Temp Synth, 20
F. Ghadami, S. Ghadami, H. Abdollah-Pour (2013)
Structural and oxidation behavior of atmospheric heat treated plasma sprayed WC–Co coatingsVacuum, 94
Kaixuan Ye, Feng Li, Zhang Jin, Jianfei Chen, Zili Li, Gan Cui, Jianguo Liu, X. Xing (2021)
Effect of SiO2 on microstructure and mechanical properties of composite ceramic coatings prepared by centrifugal-SHS processCeramics International, 47
Liaoyuan Chen, Yu Zhao, C. Guan, Tianbiao Yu (2021)
Effects of CeO2 addition on microstructure and properties of ceramics reinforced Fe-based coatings by laser claddingThe International Journal of Advanced Manufacturing Technology, 115
K. Hoyt, P. Gannon, Preston White, Rukiye Tortop, B. Ellingwood, Hamed Khoshuei (2012)
Oxidation behavior of (Co,Mn)3O4 coatings on preoxidized stainless steel for solid oxide fuel cell interconnectsInternational Journal of Hydrogen Energy, 37
X. He, R. Song, D. Kong (2019)
Microstructure and corrosion behaviours of composite coatings on S355 offshore steel prepared by laser cladding combined with micro-arc oxidationApplied Surface Science, 497
M. Zhang, X. Wang, K. Qu, Suwen Liu (2019)
Effect of rare earth oxide on microstructure and high temperature oxidation properties of laser cladding coatings on 5CrNiMo die steel substrateOptics & Laser Technology
P. Das, S. Paul, P. Bandyopadhyay (2018)
Plasma sprayed diamond reinforced molybdenum coatingsJournal of Alloys and Compounds
L Chen (2021)
10.1007/S00170-021-07297-8/FIGURES/13Int J Adv Manuf Technol, 115
R. Mahmoodian, M. Hassan, M. Hamdi, R. Yahya, R. Rahbari (2014)
In situ TiC-Fe-Al2O3-TiAl/Ti3Al composite coating processing using centrifugal assisted combustion synthesisComposites Part B-engineering, 59
Jiahao Yu, Yifan Zhang, Xiaoyue Jin, Lin Chen, Jiancheng Du, W. Xue (2019)
Fabrication and optical emission spectroscopy of enhanced corrosion-resistant CPEO films on Q235 low carbon steelSurface and Coatings Technology
jurisdictional claims
N Nisar (2021)
10.1007/S40735-021-00564-X/METRICSJ Bio Tribocorros, 7
S. Wang, K. Liang, S. Gu, Xian-Hui Zhang (2001)
Hercynite‐Free Ceramic Liner for Composite Steel Pipe Made Using a Self‐Propagating High‐Temperature Synthesis Gravitational‐Thermite ProcessJournal of the American Ceramic Society, 84
V. Sirota, Sergei Zaitsev, Dmitriy Prokhorenkov, Mihail Limarenko, A. Skiba, M. Kovaleva (2022)
NiB-CrC Coatings Prepared by Magnetron Sputtering Using Composite Ceramic NiCr-BC Target Produced by Detonation Spray CoatingNanomaterials, 12
Yuxin Li, Le-tao Jiang, Qing Lu, P. Bai, B. Liu, Wang Jianhong (2016)
A Study of Ceramic-Lined Composite Steel Pipes Prepared by SHS Centrifugal-Thermite ProcessScience of Sintering, 48
V Sreenivasulu (2022)
10.1177/09544089221115481/ASSET/IMAGES/LARGE/10.1177_09544089221115481-FIG8.JPEGProc Inst Mech Eng Part E: J Process Mech Eng
W Yang (2018)
10.1007/S11665-018-3343-5/FIGURES/11J Mater Eng Perform, 27
X. Zeng, Xiangyu Zhang, V. Pelenovich, D. Neena, Chang-Qing Xu, Y. Liu, Yanghui Jiang, Luwei Zeng, A. Pogrebnjak, R. Vildanov, A. Ieshkin, R. Rakhimov, Jun Zhang, Bing Yang, Shengjie Liu (2022)
High-temperature thin film lithium niobium oxide transducers for boltsCeramics International
Reham Fathi, Hongyu Wei, B. Saleh, N. Radhika, Jinghua Jiang, A. Ma, M. Ahmed, Qin Li, K. Ostrikov (2022)
Past and present of functionally graded coatings: Advancements and future challengesApplied Materials Today
Chaitanya Kalangi, V. Bolleddu, H. Allasi (2021)
Tribological Characteristics of Carbon Nanotubes-Reinforced Plasma-Sprayed Al2O3-TiO2 Ceramic CoatingsAdvances in Materials Science and Engineering
I Taji (2020)
10.1007/S40735-020-00428-W/METRICSJ Bio Tribocorros, 6
Wen-Bin Yang, Zhen-jun Peng, Bai-xing Liu, Weimin Liu, Jun Liang (2018)
Influence of Silicate Concentration in Electrolyte on the Growth and Performance of Plasma Electrolytic Oxidation Coatings Prepared on Low Carbon SteelJournal of Materials Engineering and Performance, 27
B. Castilho, Felipe Mazuco, A. Rodrigues, P. Avila, Raíra Apolinário, P. Daum, Fabiana Costa, R. Menezes, Gelmires Neves, C. Greiner, H. Pinto (2022)
Tailoring the Hybrid Magnetron Sputtering Process (HiPIMS and dcMS) to Manufacture Ceramic Multilayers: Powering Conditions, Target Materials, and Base LayersNanomaterials, 12
Qiaolei Li, P. Song, Xuan He, Xiao Yu, Chao Li, Taihong Huang, Kaiyue Lü, Y. Zhou, Jiansheng Lu (2019)
Plastic metallic-barrier layer for crack propagation within plasma-sprayed Cu/ceramic coatingsSurface and Coatings Technology
G. Bolelli, L. Berger, M. Bonetti, L. Lusvarghi (2014)
Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC–(W,Cr)2C–Ni and WC–CoCr hardmetal coatingsWear, 309
Yanfang Qin, Qi Jiao, Gaofeng Zheng, Fanyong Zhang, Jining He, F. Yin (2018)
Effects of spray distance on the microstructure and mechanical properties of reactive plasma sprayed TiCN coatingsCeramics International
S. Salman, Ramazan Köse, L. Urteki̇n, F. Findik (2006)
An investigation of different ceramic coating thermal propertiesMaterials & Design, 27
Shuangjian Li, C. Yu, C. Deng, Jun Liu, Xinjie Tan, Weizhen Zeng (2022)
Optimized mechanical and tribological properties of thermally sprayed ceramic coatings by constructing crystalline–amorphous heterojunctionsApplied Surface Science
Journal of Bio-and Tribo-Corrosion (2023) 9:41 sprayed WC-Co coatings
Meiyan Li, B. Han, Yong Wang, K. Pu (2017)
Effects of La2O3 on the microstructure and property of laser cladding Ni-based ceramic coatingOptik, 130
(PDF) Wear Behavior of plasma sprayed 8YSZ Thermal Barrier Coating on Stainless steel Substrate
Hongmei Zhu, M. Ouyang, Jipeng Hu, Jianwen Zhang, C. Qiu (2021)
Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser claddingCeramics International, 47
X. Xuan, Z. Su, Z. Wen, J. An, C. Liang (2016)
High-Performance Ceramic-Lined Composite Pipes with ZrO2 Additive Prepared by Centrifugal-SHS ProcessMaterials Transactions, 57
T Van Nguyen (2019)
10.1108/ACMM-09-2018-2003/FULL/XMLAnti-Corros Methods Mater, 66
A. Farjami, H. Yousefnia, Z. Seyedraoufi, Y. Shajari (2020)
Investigation of Inhibitive Effects of 2-Mercaptobenzimidazole (2-MBI) and Polyethyleneimine (PEI) on Pitting Corrosion of Austenitic Stainless SteelJournal of Bio- and Tribo-Corrosion, 6
R. Bhatia, H. Sidhu, B. Sidhu (2015)
High Temperature Behavior of Cr3C2-NiCr Coatings in the Actual Coal-Fired Boiler EnvironmentMetallurgical and Materials Transactions E, 2
B. Saleh, A. Ma, Reham Fathi, N. Radhika, B. Ji, Jinghua Jiang (2022)
Wear Characteristics of Functionally Graded Composites Synthesized from Magnesium Chips WasteTribology International
R. Jojith, N. Radhika (2021)
Reciprocal dry sliding wear of SiCp/Al–7Si-0.3 Mg functionally graded composites: Influence of T6 treatment and process parametersCeramics International
I. Fagoaga, J. Viviente, P. Gavin, J. Bronte, J. García, J. Tagle (1998)
Multilayer coatings by continuous detonation system spray techniqueThin Solid Films, 317
Zhaoliang Li, Mumeng Wei, K. Xiao, Ziheng Bai, Wei Xue, C. Dong, Dan Wei, Xiaogang Li (2019)
Microhardness and wear resistance of Al2O3-TiB2-TiC ceramic coatings on carbon steel fabricated by laser claddingCeramics International
Wen-Bin Yang, Qingbiao Li, Cancan Liu, Jun Liang, Zhen-jun Peng, Bai-xing Liu (2018)
A comparative study of characterisation of plasma electrolytic oxidation coatings on carbon steel prepared from aluminate and silicate electrolytesSurface Engineering, 34
Yunlong Wang, Zhaohua Jiang, Zhongping Yao (2009)
Microstructure, bonding strength and thermal shock resistance of ceramic coatings on steels prepared by plasma electrolytic oxidationApplied Surface Science, 256
Jiahao Qin, Qun-Zhan Huang, Xin Wang, X. Suo, Jiang Wang, Hua Li (2021)
Interfacial metal/ceramic bonding mechanism for metallization of ceramics via cold sprayingJournal of Materials Processing Technology, 288
Erika Akahoshi, Moeki Matsunaga, Keisuke Kimura, Kazuki Nakamura, Kazuki Saito, Y. Hishinuma, Teruya Tanaka, T. Chikada (2021)
Deuterium permeation through multi-layer ceramic coatings under liquid lithium-lead exposure conditionCorrosion Science, 189
M. Matsumura, Y. Oka, H. Hiura, Masaya Yano (1991)
The role of passivating film in preventing slurry erosion-corrosion of austenitic stainless steel.Isij International, 31
F Mubarok (2013)
10.1007/S11666-013-9991-Y/FIGURES/8J Therm Spray Technol, 22
F. Brownlie, T. Hodgkiess, A. Pearson, A. Galloway (2021)
A study on the erosion-corrosion behaviour of engineering materials used in the geothermal industryWear
D. Ikornikov, D. Andreev, V. Sanin, V. Yukhvid (2011)
In-situ formation of cast granules in thermit-type SHS reactionsInternational Journal of Self-Propagating High-Temperature Synthesis, 20
O. Modi, R. Dasgupta, B. Prasad, A. Jha, A. Yegneswaran, G. Dixit (2000)
Erosion of a high-carbon steel in coal and bottom-ash slurriesJournal of Materials Engineering and Performance, 9
T. Olugbade, B. Omiyale, O. Ojo (2021)
Corrosion, Corrosion Fatigue, and Protection of Magnesium Alloys: Mechanisms, Measurements, and MitigationJournal of Materials Engineering and Performance, 31
Ding-Chiang Hu, D. Kuo, J. Kao, Chun-sheng Chen, C. Tsao, C. Hsu (2022)
Fabrication of nitride films by co-sputtering of high-entropy alloys and tungstenJournal of the Australian Ceramic Society, 59
Yonglin Tuo, Zehui Yang, Ziwei Guo, Yongnan Chen, Jianmin Hao, Qinyang Zhao, Yan Kang, Yong Zhang, Yong-qing Zhao (2022)
Pore structure optimization of MoS2/Al2O3 self-lubricating ceramic coating for improving corrosion resistanceVacuum
9:41 ion ingress, freeze-thaw cycles and green corrosion inhibitor
Cheng-Yu He, Penghui Zhao, Xiang-Hu Gao, Gang Liu, P. La (2022)
High-entropy alloy nitride nanofilms via a co-sputtering method enable superior optical performance and thermal robustnessMaterials Letters
D. Kumar, Gobi Kaliaraj, A. Kirubaharan, Karthik Alagarsamy, V. Vishwakarma, R. Baskaran (2019)
Biocorrosion and biological properties of sputtered ceramic carbide coatings for biomedical applicationsSurface and Coatings Technology
K. Ibrahim, Sourabha Havaldar, Adarsha Hiriyannaiah, R. Keshavamurthy (2022)
Investigation of Corrosion Characteristics of Plasma-Sprayed Composite Coating on Bearing Steel Through Electrochemical and Salt Spray TestJournal of Bio- and Tribo-Corrosion, 8
S. Tailor, R. Mohanty, V. Sharma, P. Soni (2014)
Fabrication and Wear Behavior of Nanostructured Plasma-Sprayed 6061Al-SiCp Composite CoatingJournal of Thermal Spray Technology, 23
O. Odawara (1993)
Long ceramic-lined pipes with high resistance against corrosion, abrasion and thermal shockMaterials and Manufacturing Processes, 8
Jaeryeong Lee, M. Le, H. Chung (2007)
Physical Properties of Ceramic Layer Prepared by SHS in Centrifugal FieldMaterials Transactions, 48
A Pathak (2015)
10.1007/S11666-015-0350-Z/FIGURES/11J Therm Spray Technol, 24
(2010)
Investigation on Al 2 O 3 / YSZ eutectic ceramics lining in the pipes prepared by combustion synthesis
V. Andrei, C. Radulescu, V. Malinovschi, A. Marin, E. Coaca, M. Mihalache, C. Mihăilescu, I. Dulama, S. Teodorescu, I. Bucurica (2020)
Aluminum Oxide Ceramic Coatings on 316l Austenitic Steel Obtained by Plasma Electrolysis Oxidation Using a Pulsed Unipolar Power SupplyCoatings
Min Huang, Yu Wang, C. Chu, Mengxian Zhang, Haibo Wang, S. Xue (2017)
Wear resistance of alumina-coated oil casing steel N80 via MAO with rare earth additiveCeramics International, 43
R. Song (2003)
Hydrogen permeation resistance of plasma-sprayed Al2O3 and Al2O3–13wt.% TiO2 ceramic coatings on austenitic stainless steelSurface & Coatings Technology, 168
S. Singsarothai, M. Khanghamano, V. Rachphet, S. Niyomwas (2016)
Influence of CaO2 additives on the properties of Fe–WB-based composite lining deposited by centrifugal SHS on the inner surface of steel pipeInternational Journal of Self-Propagating High-Temperature Synthesis, 25
J. An, J. Zhao, Z. Su, Z. Wen, D. Xu (2015)
Microstructure and Mechanical Properties of ZTA Ceramic-Lined Composite Pipe Prepared by Centrifugal-SHSArabian Journal for Science and Engineering, 40
Dejiu Shen, Ming Li, Weichao Gu, Yu‐Lin Wang, G. Xing, Bo Yu, Genji Cao, P. Nash (2009)
A novel method of preparation of metal ceramic coatingsJournal of Materials Processing Technology, 209
Jin Yu, Hsin-Lung Ho (2022)
Microstructure and Mechanical Properties of (Ti, Nb)C Ceramic-Reinforced 316L Stainless Steel Coating by Laser CladdingApplied Sciences
Tao Chen, Weining Wu, Wenpeng Li, Defu Liu (2019)
Laser cladding of nanoparticle TiC ceramic powder: Effects of process parameters on the quality characteristics of the coatings and its prediction modelOptics & Laser Technology
M. Szkodo, A. Bień, M. Antoszkiewicz (2016)
Effect of plasma sprayed and laser re-melted Al2O3 coatings on hardness and wear properties of stainless steelCeramics International, 42
Jia-jie Kang, Bin-shi Xu, Hai-dou Wang, Chengbiao Wang (2014)
Influence of contact stress on rolling contact fatigue of composite ceramic coatings plasma sprayed on a steel rollerTribology International, 73
Zhaohui Liu, Hong-bo Yang, Yifan Jia, X. Shu (2017)
Heat protective properties of NiCrAlY/Al2O3 gradient ceramic coating fabricated by plasma spraying and slurry sprayingSurface & Coatings Technology, 327
G. Brunello, H. Elsayed, L. Biasetto (2019)
Bioactive Glass and Silicate-Based Ceramic Coatings on Metallic Implants: Open Challenge or Outdated Topic?Materials, 12
Y. An, Shuangjian Li, G. Hou, Xiaoqin Zhao, Hui-di Zhou, Jianmin Chen (2017)
Mechanical and tribological properties of nano/micro composite alumina coatings fabricated by atmospheric plasma sprayingCeramics International, 43
X. Huang, Longyu Zhang, Zhong Zhao, Chun Yin (2011)
Preparation and Properties of Solidified TiC-TiB2 with Hypoeutectic, Eutectic and Hypereutectic MicrostructuresAdvanced Materials Research, 233-235
Barbara Schmid, N. Koutná, Rainer Hahn, T. Wojcik, P. Polcik, P. Mayrhofer (2023)
Development of TaC-based transition metal carbide superlattices via compound target magnetron sputteringInternational Journal of Refractory Metals and Hard Materials
S. Singsarothai, Vishnu Rachphet, S. Niyomwas (2016)
Steel pipe-lined Fe–W2B-based composite coating by centrifugal-Self-propagating high-temperature synthesis processJournal of the Ceramic Society of Japan, 124
Page 22 of 23 laser clad Ni60/WC composite coatings
S. Yao, C. Li, J. Tian, Guanjun Yang, Cheng-Xin Li (2016)
Conditions and mechanisms for the bonding of a molten ceramic droplet to a substrate after high-speed impactActa Materialia, 119
V. Kosarev, S. Klinkov, B. Melamed, Y. Nepochatov, N. Ryashin, V. Shikalov (2018)
Cold spraying for power electronics: Deposition of thick topologically patterned copper layers on ceramics, 2027
Yunlong Wang, Zhaohua Jiang, Zhongping Yao, Hui Tang (2010)
Microstructure and corrosion resistance of ceramic coating on carbon steel prepared by plasma electrolytic oxidationSurface & Coatings Technology, 204
J. Thakare, R. Mulik, M. Mahapatra (2018)
Effect of carbon nanotubes and aluminum oxide on the properties of a plasma sprayed thermal barrier coatingCeramics International, 44
J An (2015)
10.1007/S13369-015-1747-1/METRICSArab J Sci Eng, 40
Zihan Zhao, Minfang Chen, C. You, Wei Li, D. Tie, Hai-feng Liu (2020)
Effect of α-Al2O3 additive on the microstructure and properties of MAO coatings prepared on low carbon steelJournal of materials research and technology, 9
PX Zhang (2021)
10.1007/S10853-020-05741-W/FIGURES/14J Mater Sci, 56
F. Shao, Kai-Ts'ung Yang, Huayu Zhao, Chenguang Liu, Liang Wang, S. Tao (2015)
Effects of inorganic sealant and brief heat treatments on corrosion behavior of plasma sprayed Cr2O3–Al2O3 composite ceramic coatingsSurface & Coatings Technology, 276
Yuanyuan Yan, Yong Han, Dichen Li, Juanjuan Huang, Q. Lian (2010)
Effect of NaAlO2 concentrations on microstructure and corrosion resistance of Al2O3/ZrO2 coatings formed on zirconium by micro-arc oxidationApplied Surface Science, 256
A. Hospach, G. Mauer, R. Vaßen, D. Stöver (2011)
Characteristics of Ceramic Coatings Made by Thin Film Low Pressure Plasma Spraying (LPPS-TF)Journal of Thermal Spray Technology, 21
Steel substrates used in high-pressure applications or when subjected to extreme environments have the drawback of corroding and eroding. Extensile studies have been done related to ways to protect the surface with different types of coating, considering the downtime and extra costs associated with maintenance. Ceramic coating over steel surfaces has been extensively researched as it provides a practical solution for using steel in extreme working conditions with enhanced high-temperature oxidation resistance. Nowadays, numerous methods for applying ceramic coatings over steel substrates were explored and can be selected based on the characteristics of the substrate, the type of coating material, and the desirable characteristics of the coating. Recent research focuses on fine-tuning coating qualities for high-end applications, by adding additives, and optimizing process parameters to improve coating properties. In this review, the fabrication methods adopted for ceramic coatings over steel, as well as their microstructural characteristics, applications, and potential future trends, are presented and discussed.
Journal of Bio- and Tribo-Corrosion – Springer Journals
Published: Sep 1, 2023
Keywords: Plasma spray; Ceramics; Centrifugal thermite; Laser cladding; Wear; Corrosion
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.