Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A Guide to Additive ManufacturingStandardisation in AM

A Guide to Additive Manufacturing: Standardisation in AM [A standard is a published document that describes a technical specification or a list of guidelines in the form of rules, definitions, methods, vocabularies, or codes of practices. Standards provide a unified source of reference for specifying or representing products. Before the industrial revolution, manufacturers from different places used to compare and copy the dimensions and specifications of components to match those of a prototype.] http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png

A Guide to Additive ManufacturingStandardisation in AM

Part of the Springer Tracts in Additive Manufacturing Book Series
Editors: Godec, Damir; Gonzalez-Gutierrez, Joamin; Nordin, Axel; Pei, Eujin; Ureña Alcázar, Julia
Pei, Eujin; Kabir, Israt
A Guide to Additive Manufacturing — Sep 13, 2022
Download PDF
14 pages

Loading next page...
 
/lp/springer-journals/a-guide-to-additive-manufacturing-standardisation-in-am-lOEcVM1kdy

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Springer International Publishing
Copyright
© The Editor(s) (if applicable) and The Author(s) 2022. This book is an open access publication.
ISBN
978-3-031-05862-2
Pages
59 –73
DOI
10.1007/978-3-031-05863-9_3
Publisher site
See Chapter on Publisher Site

Abstract

[A standard is a published document that describes a technical specification or a list of guidelines in the form of rules, definitions, methods, vocabularies, or codes of practices. Standards provide a unified source of reference for specifying or representing products. Before the industrial revolution, manufacturers from different places used to compare and copy the dimensions and specifications of components to match those of a prototype.]

Published: Sep 13, 2022

There are no references for this article.