Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A Practical Guide to Design for Additive ManufacturingAdditive Manufacturing Technologies

A Practical Guide to Design for Additive Manufacturing: Additive Manufacturing Technologies [This chapter describes the main additive manufacturing technologies in use today. Note, however, that new technologies are continuously appearing on the market, so this space is in a continuous state of flux. Some of the technologies also have minor variants such as, for example, a material extrusion which might have one, two, or even more, extrusion nozzles. The intent of this chapter is not to cover every single technology in existence but, rather, to give the novice an overall understanding how each category of AM technology works.] http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png

A Practical Guide to Design for Additive ManufacturingAdditive Manufacturing Technologies

Download PDF
20 pages

Loading next page...
 
/lp/springer-journals/a-practical-guide-to-design-for-additive-manufacturing-additive-Mn89j4q3Hd
Publisher
Springer Singapore
Copyright
© Springer Nature Singapore Pte Ltd. 2019
ISBN
978-981-13-8280-2
Pages
19 –39
DOI
10.1007/978-981-13-8281-9_2
Publisher site
See Chapter on Publisher Site

Abstract

[This chapter describes the main additive manufacturing technologies in use today. Note, however, that new technologies are continuously appearing on the market, so this space is in a continuous state of flux. Some of the technologies also have minor variants such as, for example, a material extrusion which might have one, two, or even more, extrusion nozzles. The intent of this chapter is not to cover every single technology in existence but, rather, to give the novice an overall understanding how each category of AM technology works.]

Published: May 22, 2019

There are no references for this article.