Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A Practical Guide to Design for Additive ManufacturingConcluding Remarks

A Practical Guide to Design for Additive Manufacturing: Concluding Remarks [Additive manufacturing is in an extremely rapid state of flux. By the time you have read this book, new AM technologies, materials or software will have appeared on the market. It is a growing area of research and there are few universities that do not have some research program in AM, and existing and new companies are increasingly adding it to their production systems.] http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png

A Practical Guide to Design for Additive ManufacturingConcluding Remarks

Download PDF
1 page

Loading next page...
 
/lp/springer-journals/a-practical-guide-to-design-for-additive-manufacturing-concluding-EjpqsBpJCU

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Springer Singapore
Copyright
© Springer Nature Singapore Pte Ltd. 2019
ISBN
978-981-13-8280-2
Pages
217 –218
DOI
10.1007/978-981-13-8281-9_14
Publisher site
See Chapter on Publisher Site

Abstract

[Additive manufacturing is in an extremely rapid state of flux. By the time you have read this book, new AM technologies, materials or software will have appeared on the market. It is a growing area of research and there are few universities that do not have some research program in AM, and existing and new companies are increasingly adding it to their production systems.]

Published: May 22, 2019

There are no references for this article.