Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A Practical Guide to Design for Additive ManufacturingGuidelines for AM Tooling Design

A Practical Guide to Design for Additive Manufacturing: Guidelines for AM Tooling Design [We have, so far, mostly been talking about using AM for direct part production. However, many industries are now starting to use AM as a way of manufacturing the tooling for conventionally injection molded, cast, extruded, or sheet-metal parts. This means that the final parts are exactly the same as those that they would have previously made with conventional tooling, and only that the tooling, itself, was produced with AM. This makes it relatively easy for engineers to accept the technology, as the produced parts are identical (or better) to the parts they are used to.] http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png

A Practical Guide to Design for Additive ManufacturingGuidelines for AM Tooling Design

Download PDF
7 pages

Loading next page...
 
/lp/springer-journals/a-practical-guide-to-design-for-additive-manufacturing-guidelines-for-v9cLs9N8cY
Publisher
Springer Singapore
Copyright
© Springer Nature Singapore Pte Ltd. 2019
ISBN
978-981-13-8280-2
Pages
85 –92
DOI
10.1007/978-981-13-8281-9_6
Publisher site
See Chapter on Publisher Site

Abstract

[We have, so far, mostly been talking about using AM for direct part production. However, many industries are now starting to use AM as a way of manufacturing the tooling for conventionally injection molded, cast, extruded, or sheet-metal parts. This means that the final parts are exactly the same as those that they would have previously made with conventional tooling, and only that the tooling, itself, was produced with AM. This makes it relatively easy for engineers to accept the technology, as the produced parts are identical (or better) to the parts they are used to.]

Published: May 22, 2019

There are no references for this article.