Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Hyper-specializing in Saxophone Using Acoustical Insight and Deep Listening SkillsAcoustics of the Saxophone

Hyper-specializing in Saxophone Using Acoustical Insight and Deep Listening Skills: Acoustics of... [In this chapter, an overview of wind-instrument acoustics is provided as a theoretical foundation to design, build, and use grafted wind instruments. The generic wind instrument is described by a tone generator that is coupled to two adjacent resonators, the instrument’s body and the performer’s vocal tract. As a starting point, the acoustical behavior of a simple cylindrical resonator is examined, and the acoustical consequences of finger holesFinger holes are discussed. The investigation continues with the introduction of the conical resonator, which describes the acoustical behavior of the saxophone body adequately but is acoustically more complex than the cylindrical resonator. In the following section, common tone generators for wind instruments are introduced and classified. The section includes a description of the acoustical behavior for the single reed, double reed, free reed, fluteRim flute, and lip-valve instrument mechanisms.Lip vibration Afterward, the coupling between a tone generatorTone generator and a resonator is addressed, which can only be described as a non-linear system. The chapter concludes with a description of the acoustical behavior of the adaptable vocal tract. Its acoustical importance is often underestimated when dealing with wind instruments.] http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png

Hyper-specializing in Saxophone Using Acoustical Insight and Deep Listening SkillsAcoustics of the Saxophone

Download PDF
32 pages

Loading next page...
 
/lp/springer-journals/hyper-specializing-in-saxophone-using-acoustical-insight-and-deep-p62Ncb0UCY

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Springer International Publishing
Copyright
© Springer Nature Switzerland AG 2019
ISBN
978-3-030-15045-7
Pages
5 –37
DOI
10.1007/978-3-030-15046-4_2
Publisher site
See Chapter on Publisher Site

Abstract

[In this chapter, an overview of wind-instrument acoustics is provided as a theoretical foundation to design, build, and use grafted wind instruments. The generic wind instrument is described by a tone generator that is coupled to two adjacent resonators, the instrument’s body and the performer’s vocal tract. As a starting point, the acoustical behavior of a simple cylindrical resonator is examined, and the acoustical consequences of finger holesFinger holes are discussed. The investigation continues with the introduction of the conical resonator, which describes the acoustical behavior of the saxophone body adequately but is acoustically more complex than the cylindrical resonator. In the following section, common tone generators for wind instruments are introduced and classified. The section includes a description of the acoustical behavior for the single reed, double reed, free reed, fluteRim flute, and lip-valve instrument mechanisms.Lip vibration Afterward, the coupling between a tone generatorTone generator and a resonator is addressed, which can only be described as a non-linear system. The chapter concludes with a description of the acoustical behavior of the adaptable vocal tract. Its acoustical importance is often underestimated when dealing with wind instruments.]

Published: Apr 26, 2019

There are no references for this article.