Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Processing and Deformation Behavior of Gamma TiAl Alloys with Fine-Grained Equiaxed Microstructures

Processing and Deformation Behavior of Gamma TiAl Alloys with Fine-Grained Equiaxed Microstructures This paper describes how a submicrocrystalline structure can be produced by isothermal deformation of cast and powder metallurgy γ-TiAl-based alloys at temperatures 1000°C and below using relatively inexpensive nickel-based superalloy die tooling. A detailed analysis of the effects of initial microstructure, chemical compositions, conditions of heat treatment and hot working on the formation of a homogeneous fine-grained microstructure in γ-TiAl-based alloys is presented. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Performance Materials Springer Journals

Processing and Deformation Behavior of Gamma TiAl Alloys with Fine-Grained Equiaxed Microstructures

Loading next page...
 
/lp/springer-journals/processing-and-deformation-behavior-of-gamma-tial-alloys-with-fine-ypSzVN449d
Publisher
Springer Journals
Copyright
Copyright © 1999 by Kluwer Academic Publishers
Subject
Engineering; Automotive Engineering; Characterization and Evaluation of Materials; Classical Mechanics; Metallic Materials
ISSN
0929-1881
eISSN
1572-8765
DOI
10.1023/A:1008718724229
Publisher site
See Article on Publisher Site

Abstract

This paper describes how a submicrocrystalline structure can be produced by isothermal deformation of cast and powder metallurgy γ-TiAl-based alloys at temperatures 1000°C and below using relatively inexpensive nickel-based superalloy die tooling. A detailed analysis of the effects of initial microstructure, chemical compositions, conditions of heat treatment and hot working on the formation of a homogeneous fine-grained microstructure in γ-TiAl-based alloys is presented.

Journal

Advanced Performance MaterialsSpringer Journals

Published: Oct 1, 2004

References